Nexgrill Deluxe 6-Burner Propane Gas Grill with Side-Burner
Nexgrill 6-Burner Buyers’ Guide
Before you light your grill, make sure that the LP gas tank is full enough and that all the gas connections are sufficiently tightened and are secure. Switch your gas supply on and then open the main lid of the grill. Push rotate the main burner control dial to the HIGH position. Then, press the Electronic Ignition button for 4 to 5 seconds to fully light your burner. If your burner does not light after doing that, then turn it off and turn the gas at the LP tank off. Wait for 5-10 minutes for the gas to fully clear up, then turn the gas on and repeat this process. If you want to light the additional burners, then turn the required knobs to HIGH.
To assemble your grill, you will need a head screwdriver and an adjustable wrench. Start by attaching the 4 cart legs to the bottom panel by tightening the pre-assembled screws. Next, attach the side panels to the legs using the screwdriver and the screws already in the panel. Repeat these with the remaining two standard panels. Then, loosen the screws on the rear panel, slide it into position, and tighten the screws. Attach the cart frame to the front using 4 A screws. Loop one end of the cart rod into the side panel and screw the bottom of the rod onto the bottom panel. Install the wheels of the grill on the legs by tightening them. Screw the handles onto the cart doors by undoing and redoing the pre-assembled screws. Install the doors onto the cart frame by sliding the studs into place. Lift the firebox, place it on top of the cart and screw it into place. Simply screw the grease tray into place under the firebox, and you are ready to use your grill.
Kitchen tools price updated on 2020-01-17 / Disclaimer: as an Amazon Associate a Skillet Director team earns from qualifying purchases.