How a Microwave Oven Works?
How a Microwave Oven Works EngineerGuy Series #4
This microwave oven is a truly remarkable feat of engineering.
The rapid heating that makes microwaves popular
is made possible by power provided from
this vacuum tube
Now, if you picture a vacuum tube at all it’s likely in
a radio like this.
Inevitably, tiny transistors and microchips replaced
clunky vacuum tubes, but it’s too soon to
relegate them to the museum.
Microchips can’t easily replace tubes for producing power.
For example, in heating food.
Now, a microwave contains three main components
A vacuum tube called a magnetron
it generates the energy that heats food.
A waveguide hidden in the wall to direct that energy to the food
and a chamber to hold the food and safely contain the microwave radiation.
In principle, a microwave oven heats no differently
than any other type of heat transfer.
At a molecular level heat is a transfer of energy
that results in increased motion of the molecules in a substance.
Since we aren’t quantum-sized,
we observe this increase in motion
as a rise in temperature.
In a traditional oven or stove we heat food
by placing a pan on a burner
or in the oven where the walls radiate heat,
which cooks the outside of the food.
The insides cook when heat transfers from the surface
of the food to its interior.
In contrast, energy from the magnetron penetrates
into the food, which means the whole mass of the food
can be cooked simultaneously.
How does it do this?
Well, our food is filled with water,
which is positively charged at one end,
and negative at the other.
To give these molecules more energy,
we expose it to electromagnetic waves that emanate from the tube.
By definition, the waves have electrical and magnetic fields
that change direction rapidly.
For this oven, the direction of the fields change
two point four five billion times per second.
Water will try to align with the radiation’s electric field.
The changing field rocks the water molecules
back and forth rapidly and molecular friction
from this creates heat as the motion disrupts
the hydrogen bonds between neighboring water molecules.
Now, you can get an idea of the wavelength of the energy
emitted from the magnetron using cheese.
Now, you can see on here sections where the cheese
has completely melted, and other sections where it’s completely unheated.
The oven’s metal walls only reflect waves of
a length that fits inside the oven.
This standing wave causes hot and cold spots inside the oven.
The three-dimensional pattern of waves is difficult to predict,
but the principle can be seen by looking at
the waves in a single dimension.
The peaks and valleys in the wave represent
the greatest energy of the wave,
while the nodes here correspond to the “cold” spots inside the chamber.
If I measure the distance between melted cheese spots
I find about 2 1/2 inches.
That would be half the wavelength
the distance between nodes
and is pretty close to the actual wavelength of microwave radiation used.
Using that wavelength I can estimate the microwave radiation’s frequency.
The frequency is related to the wavelength by the speed of light.
I get an answer that only has a 4 or 5 percent error.
Not bad for this primitive measurement.
Now, the real engineering in the microwave oven
lies in creating the magnetron that
generates high powered radio waves.
It’s truly an amazing and revolutionary device.
The vacuum tube is inside here.
These are cooling fins
thin pieces of metal that dissipate the heat as the magnetron operates.
The key parts are these two magnets and
the vacuum tube.
Now I have another one so you can see the inside.
You apply a large voltage across both
the inner filament and the circular cooper outside.
This voltage “boils” electrons off the center filament
and they fly toward the circular copper section.
The filament is made from tungsten and thorium.
Tungsten because it can withstand high temperatures
and thorium because it’s a good source of electrons.
The magnets bend these electrons so they swing
back toward the center filament.
We adjust the magnetic strength so that the now
orbiting electrons just brush past the opening of these cavities.
Like blowing over a half filled pop bottle to make it whistle,
this creates an oscillating wave – the microwave radiation that heats food.
It’s simply astonishing that these cavities can be made
with high precision, low cost, and incredibly high reliability.
I’m Bill Hammack, the EngineerGuy.
This video is based on a chapter in the book
Eight Amazing Engineering Stories.
The chapter features more information about this subject.
Learn more about the book at the address below.
A product price updated on 2020-03-28 / Disclaimer: as an Amazon Associate a Skillet Director team earns from qualifying purchases.